REVIEWMISSION 025 · PCB layout · Reference transitionsIntermediate

It Changes Layers. What About the Return?

A 50 MHz clock must reach a bottom-layer connector, so one signal via is unavoidable. Use the supplied stackup to identify its references and review the high-frequency path at the transition.

Requirements

Clock · 50 MHzEdge · 1 nsStackup · L1 / GND / +3V3 / L4Added L · ≤2 nHOvershoot · ≤0.35 V
  1. 01Close the return transition
  2. 02Trace the complete loop
Circuit overview

Supplied stackup and route

Four-layer stackup with a signal changing from layer one to layer fourThe drawing shows the four layers, signal via and the selected surface component with its plane connections.SOURCELOADL1L2 · GNDL3 · +3V3L4GND VIASIGNAL VIA
Signal routePlane connectionPlane clearance

Electrical cross-section, not to scale. Only the relevant plane connections are shown.

The bottom connector fixes the L4 endpoint; “keep everything on L1” is not an available revision. The review is about giving the return current a transition beside the unavoidable signal via.

Circuit and case data
Circuit and case data
Supplied comparison model
Elementground viaSeparation38 mmAdded loop L20.00 nHClock overshoot1.38 V

The numbers are supplied comparison proxies, not a field solver. The capacitor is a qualified part for this exercise; 100 nF is not a universal prescription.

Evidence notebook 0 saved

No evidence saved yet. Measure, inspect the result, then save useful observations.

Current task
Current task

Step 1 of 2

Close the return-current path

0 evaluated decisions · Draft and evidence saved locally
Technical references