DESIGNMISSION 024 · Power · Worst-case analysisIntermediate

It Only Fails at the Corners

A 3.3 V sensor rail looks perfect on a room-temperature bench. In the product, the battery reaches its minimum, the load reaches 300 mA and the enclosure is hot. Qualify the complete voltage budget instead of signing off one nominal reading.

Requirements

Input · 3.70–4.20 VLoad · 300 mAHot diode · 0.18 VPath · 0.30 ΩSensor rail · 3.24–3.36 V
  1. 01Build the guaranteed design
  2. 02Record release corners
Circuit overview

Power path under review

Low-line sensor power path and adjustable LDOThe minimum source voltage passes through a protection diode and resistive path before an adjustable regulator supplies the sensor.BATTERY3.70–4.20 VD1 · 0.18 V hotR PATH0.30 ΩU10.160 V dropoutSENSOR LOAD300 mA ·3.24–3.36 VR TOP200 kΩR BOTTOM100 kΩFBTypical dropout

The upstream diode and path values are supplied worst-case board data. The regulator candidates are fictional but expose separate typical, room maximum and hot maximum dropout values.

Circuit and case data
Circuit and case data
Regulator data
CandidateTypical dropoutMaximum dropout · 25°CMaximum dropout · full temperature
U10.160 V0.250 V0.350 V
U20.080 V0.120 V0.180 V
U30.045 V0.070 V0.090 V

All candidates meet the supplied input-voltage and load-current basics.

Live corner worksheet
Nominal setpoint3.300 VLow-line LDO input3.430 VHeadroom-limited output3.270 VComplete low corner3.224 VFeedback low3.224 VFeedback high3.378 V

Low-line input subtracts hot diode loss and I·R path drop. Adjustable-output corners combine reference accuracy with opposing resistor tolerances.

Evidence notebook 0 saved

No evidence saved yet. Measure, inspect the result, then save useful observations.

Current task
Current task

Step 1 of 2

Build the guaranteed design

0 evaluated decisions · Draft and evidence saved locally
Technical references

Qualification boundary

Typical graphs describe expected behavior, not a production guarantee. All supplied regulator candidates satisfy the input-voltage and load-current basics of this exercise; they differ in dropout and output-envelope behavior. This is a static guaranteed-corner worksheet. Dropout, reference tolerance, resistor tolerance, diode drop and path resistance are supplied independent worst-case bounds; the low output is approximated as the lower of programmed setpoint and available dropout headroom. Transients, PSRR, loop stability, startup and thermal self-heating remain separate checks. A real release must use the current part datasheet, stability components, transient response, thermal limits and measured hardware.

TI SLVA207 · Understanding LDO Dropout