REVIEWMISSION 035 · Mixed signal · ADC groundingIntermediate

How Many Grounds Does This ADC Need?

A 24-bit ADS124S08 reads a bridge sensor while an MCU clocks its SPI interface. Review the ground plane, functional partition and supply-current loops against the actual device guidance. The goal is not to choose “one ground” or “two grounds” by slogan; it is to control where analog and digital currents flow.

Requirements

ADC · ADS124S08AVSS–DGND · ≤5 mVShorted-input noise · ≤5 µV RMSSupply bounce · ≤10 mVAnalog source · bridge sensorDigital interface · SPI
  1. 01Review the grounding plan
  2. 02Prove the current paths
Circuit overview

Ground and return-current map

ADS124S08 mixed-signal PCB grounding mapAnalog circuitry is placed to the left of the ADC and digital circuitry to the right. The selected ground plane, route partition and decoupling loops are shown.ADS124S08 SENSOR BOARD · LAYER 2 REFERENCE VIEWANALOG REGIONDIGITAL REGIONBRIDGE + RCAIN0 / AIN1quiet sourceU1 · ADS124S08AVSSDGNDMCUSPI masterSCLKAVDD / DVDDCREMOTEREVIEW LIMITSΔGND ≤ 5 mVnoise ≤ 5 µV RMSsupply bounce ≤ 10 mVAVSS and DGND names identify current domains; they do not automatically require isolated copper islands.

Inspect the original captures first. The lookup values characterize the supplied layout options; revised captures are separate authored records. The 5 mV, 5 µV RMS and 10 mV limits belong to this project, not the TI datasheet.

Circuit and case data
Circuit and case data
Characterization lookup
Ground-pin delta46.0 mVInput noise12.5 µV RMSSupply bounce34.0 mV

A continuous plane can still perform badly if the digital route crosses the analog region. A split plane can work only when its connection and every signal return are intentionally controlled.

EVIDENCE INSPECTORReady to inspect

Authored measurement capture

Inspect and save the original case evidence before making a decision.

Select an artifact, inspect its contents, then save the observation.

Evidence notebook 0 saved

No evidence saved yet. Measure, inspect the result, then save useful observations.

Current task
Current task

First inspect and save every original-case artifact to unlock the decision.

Step 1 of 2

Review the mixed-signal layout

0 evaluated reviews · Plan and evidence saved locally
Technical references

Device guidance

TI recommends partitioning analog and digital circuitry, using a single ground plane, and connecting analog and digital grounds together close to the device. It also permits a split when the planes reconnect at the ADC and routes remain over their respective references.

Texas Instruments ADS124S08 datasheet · layout guidelines